lon Exchange Resins

 lon Exchange Resins

SEPLITE @ lon Exchange Resins

lon exchange is a powerful chemical technoloav through a reversible chemical reaction where dissolved ions are removed from solution and replaced with other ions of the same or similar electrical charae. lon exchange resin facilitates ion exchange reactions The resin itself is composed of organic polymers that forms a network of hvdrocarbons. and ion exchange sites. called"functional qroup" throughout the matrix The ion exchange sites attract ions of an opposina charge. which aive the ion exchange resin its separation capabilities

 

lon exchange resins are classified into cation exchange resins and anion exchange resins. as well as mixed bed ion exchange resins.The cation exchange resin can be exchanged with a cation, and the anion exchange resin can be exchanged with an anion. The mixed bedion exchange resin is a physical mixture of a positive resin and an anion resin, and at the same time removes anions and cations in the water.



Mostly, ion exchange resin could be regenerated to restore its ion exchange ability. and the ion exchange resin regeneration is accomplished through the application of a chemical regeneration solution. Through regeneration, ion exchange resin could deliver consistent results and.have a long service life.

lon exchange resins are widely used in different separation, purification, and decontamination process. The most common examplesare water softening and water purification. Besides, it could be used in metal separation, sugar manufacturing, bio-pharmaceuticals, juice purification and so on.

评论

发表评论

此博客中的热门博文

SEPLITE ® Adsorbent Resin

图片
SEPLITE  ® Adsorbent Resin Adsorbent resins are the designable Macroporous Polymer adsorbents, usually used in plant extraction, pharmaceuticals purification, juice decolorization. The earliest adsorbent used by humans is activated carbon, which has a large specific surface area (500-1700 m2/g). It can remove pollutants from water by physical adsorption, chemical adsorption and ion exchange adsorption. In addition, it demonstrates excellent gas adsorption characteristics. The macroporous adsorbent is a kind of high molecular polymer, which combines the principles of adsorption and molecular sieve to concentrate and separate organic substances. The macroporous adsorbent is prepared by suspension polymerization. Its physicochemical properties are stable, insoluble in acids, bases and organic solvents. Its porogen 、 skeleton and polarity could been designed to meet all kinds of separation requirement.     The macroporous adsorbent  selectively adsorbs organic subst...
阅读全文

Some questions about using ion exchange resins in water treatment

图片
In   water treatment  using  Ion Exchange Resins , there are a number of points that need special attention. Here are some:   1.Use Care when performing backwashing During backwashing, if the water flow is not adequate for the specific product or the operation is incorrect, resins may be washed out of the reactor and lost. This is the main reason why resins are found in trenches and waste water ponds.   2. Inspect regularly your vessels to make sure the nozzles or liquid distribution parts are intact If the nozzles or other liquid distribution parts are damaged, the resins will leak out of the equipment, and then enter the subsequent equipment or water supply system. Therefore, the operation of the downstream equipment will be disturbed, and the quality of the produced water may be impacted.     3. Always monitor the quality and the amount of water produced. When operating Mixed Bed, select Seplite  resin types allowing good separation o...
阅读全文